Iteaduino MEGA2560 is a derivative version of the Arduino MEGA 2560. It’s designed is based on Arduino MEGA, 100% compatible to its existing program and shields, but the smaller size, lower power consumption and with much practical improvement. In addition, it has all ATMega2560 pins breakout, which are 16 pins more than Arduino MEGA 2560.
Features
- Arduino shields compatible
- 3.3V / 5V operation level
- Wide range power supply and low power consumtion
- Small size, but all ATMega2560 pins breakout
Specification
- Microcontroller: ATMega2560
- Max Frequency: ATMega2560
- RAM Capacity: 8K
- FLASH Capacity: 256K
-
Power Supply:
- External 12V
- External 24V
- External 7V
- External 9V
- USB 5V
-
I/O Operation Level:
- 3.3V
- 5V
- Board Size: 77mm x 60mm
Hardware
Pin Mapping
| Pin of Arduino | Pin of Atmega | Pin of Arduino | Pin of Atmega |
| D0 | PE0 | RX2 | PH1 |
| D1 | PE1 | TX2 | PH0 |
| D2 | PE4 | D18 | PD3 |
| D3 | PE3 | D19 | PD2 |
| D4 | PG5 | D22 | PA0 |
| D5 | PE3 | D23 | PA1 |
| D6 | PH3 | D24 | PA2 |
| D7 | PH4 | D25 | PA3 |
| D8 | PH5 | D26 | PA4 |
| D9 | PH6 | D27 | PA5 |
| D10 | PB4 | SS | PB0 |
| D11 | PB5 | MO | PB2 |
| D12 | PB6 | MI | PB3 |
| D13 | PB7 | SCK | PB1 |
| A0 | PF0 | A6 | PF6 |
| A1 | PF1 | A7 | PF7 |
| A2 | PF2 | A8 | PK0 |
| A3 | PF3 | A9 | PK1 |
| A4 | PF4 | SDA | PD1 |
| A5 | PF5 | SCL | PD0 |
Documents
