This 13.56Mhz RFID module is an RFID reader capable support ISO14443A, Mifare series card over a serial line. It can easely be attached to an arduino to have RFID fun. This RFID module is capable to write and read 13.56Mhz RFID card/tag.
Specification
- Model: No. RDM880
- R/W chip: MFRC500,MFRC400,MFRC531,MFRC632
- Standard: ISO/IEC 14443 type a
- Frequency: 13.56MHz
- Baud Rate: 9600-115200bit/s(configurable, default9600)
- Power supply: DC5V(5%)
- Current: <70mA
- Operating range: 30-100mm(reading range depend on antenna and card/tag)
- interface: TTL electrical level
- Working temperature: -10 degree to 70 degree
- Storage temperature: -20 degree to 80 degree
- Board Size: 39.00*19.00*9.00 mm(DIP28)
- Antenna Size:54.20*72.70 mm, Wire:80mm
Documents
